Arthur_Martin ASL5346LA User Manual download pdf (Page 10)

OPTIONS

Desired options must be

activated every time before you

start a programme.

It is not possible to activate or

deactivate options while a

programme is running.

Not all options are compatible

with each other. If you have

selected non compatible

options, the appliance will

automatically deactivate one or

more of them. Only the

indicators of the options still

active will stay on.

XtraDry

Activate this option when you want to boost

the drying performance. With the use of this

option, the duration of some programmes,

water consumption and the last rinse

temperature can be affected.

The option XtraDry is not a permanent

option and must be selected at every cycle.

How to activate XtraDry

Press

. The related indicator comes on.

If the option is not applicable to the

programme, the related indicator does not

come on or it flashes quickly for a few

seconds and then goes off.

The display shows the updated programme

duration.

TimeManager

This option increases the pressure and the

temperature of the water. The washing and

the drying phases are shorter.

The total programme duration decreases by

approximately 50%.

The washing results are the same as with

the normal programme duration. The drying

results can decrease.

How to activate TimeManager

Press , the related indicator comes on.

If the option is not applicable to the

programme, the related indicator does not

come on or it flashes quickly for a few

seconds and then goes off.

The display shows the updated programme

duration.

BEFORE FIRST USE

1. Make sure that the current level of

the water softener agrees with the

hardness of the water supply. If not,

adjust the level of the water

softener.

2. Fill the salt container.

3. Fill the rinse aid dispenser.

4. Open the water tap.

5. Start a programme to remove any

processing residuals that can still be

inside the appliance. Do not use

detergent and do not load the baskets.

When you start a programme, the

appliance can take up to 5 minutes to

recharge the resin in the water softener. It

seems that the appliance is not working.

The washing phase starts only after this

procedure is completed. The procedure will

be repeated periodically.

The salt container

CAUTION! Only use salt

specifically designed for

dishwashers.

The salt is used to recharge the resin in the

water softener and to assure good washing

results in the daily use.

10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 63 64

Comments to this Manuals

No comments