Arthur_Martin ASL5346LA User Manual download pdf (Page 9)

1. To enter the user mode, press and hold

simultaneously and until

the indicators , and

start to flash and the display is blank.

2. Press

.

• The indicators and go

off.

• The indicator continues to flash.

• The display shows the current

setting: e.g. = level 5.

3. Press again and again to change the

setting.

4.

Press the on/off button to confirm the

setting.

The rinse aid empty notification

The rinse aid helps to dry the dishes

without streaks and stains.

The rinse aid is automatically released

during the hot rinse phase.

When rinse aid chamber is empty, the rinse

aid indicator is turned on notifying to refill

rinse aid. If you are using multi-tabs

containing rinse aid and you are satisfied

with the drying result, you can deactivate

the notification for refilling rinse aid.

However, we recommend that you always

use rinse aid for best drying performance.

If you use standard detergent or multi-

tablets without rinse aid, activate the

notification to keep the rinse aid refill

indicator active.

How to deactivate the rinse aid

empty notification

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously

and until

the indicators

, and

start to flash and the display is blank.

2. Press .

• The indicators and go off.

• The indicator continues to

flash.

• The display shows the current

setting.

–

= rinse aid empty notification

activated.

–

= rinse aid empty

notification deactivated.

3. Press to change the setting.

4. Press the on/off button to confirm the

setting.

Acoustic signals

Acoustic signals sound when a malfunction

of the appliance occurs. It is not possible to

deactivate these acoustic signals.

There is also an acoustic signal that sounds

when the programme is completed. By

default this acoustic signal is deactivated

but it is possible to activate it.

How to activate the acoustic

signal for the end of programme

The appliance must be in programme

selection mode.

1. To enter the user mode, press and hold

simultaneously

and until

the indicators , and

start to flash and the display is blank.

2. Press

.

• The indicators and go off.

• The indicator

continues to

flash.

• The display shows the current

setting:

–

= Acoustic signal off.

– = Acoustic signal on.

3. Press

to change the setting.

4. Press the on/off button to confirm the

setting.

9

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 63 64

Comments to this Manuals

No comments